|
|
Torque75 New user 55 Posts |
How does everyone mark their gaffed decks for easy storage?
|
karnak Special user Connecticut 750 Posts |
I put a narrow sliver trimmed from a Post-It note (just its sticky part) on the bottom of each deck, to label mine.
When decks are stacked for storage, it’s easy to see at a glance which deck is which. Prior to using a deck, I’ll first peel off its sticky label. Afterward, I just stick its label back on its bottom again.
For a supernatural chiller mixing magic (prestidigitation, legerdemain) with Magic (occultism, mysticism), check out my novel MAGIC: AN OCCULT THRILLER at http://www.amazon.com/Magic-Occult-Thriller-Reed-Hall/dp/1453874836
|
karnak Special user Connecticut 750 Posts |
For a supernatural chiller mixing magic (prestidigitation, legerdemain) with Magic (occultism, mysticism), check out my novel MAGIC: AN OCCULT THRILLER at http://www.amazon.com/Magic-Occult-Thriller-Reed-Hall/dp/1453874836
|
Tukaram Loyal user Iloilo, Philippines 227 Posts |
I keep them in card clips - the clips are labeled.
I have seen some mark the card case, on the bar code. |
Magicbob89 New user Maryland 27 Posts |
Quote:
On Feb 6, 2024, karnak wrote: I did kind of the same thing but I went fancy and used a label maker |
Sarah Anne New user 4 Posts |
I do a similar thing to the pic Karnak shared, but it’s more like a band of paper around the bulk of the deck rather than a label at the end. Might consider something else though!
|
DelMagic Special user 723 Posts |
I use these with good success. I like the fact that they are removable.
The volume in this source may be way more than you want, so perhaps you can find sources elsewhere that fit your needs better. I use these for decks and and other items so I will use them eventually. I make up my own 1-way and 2-way forcing decks so I use a lot for that. https://wbmason.com/ProductDetail.aspx?I......PK&COID= |