|
|
Go to page 1~2 [Next] | ||||||||||
Ed_Millis![]() Inner circle Yuma, AZ 2292 Posts ![]() |
I'm throwing in the towel on this one!
I need a plastic box for a larger-size Burglar Ball effect. I got some clear plastic sheets from the hardware store and tried making it myself, but I can't get a clean cut to save my life! And I'm spending way too much time on this and nothing else. Would someone be interested in building me a clear plastic box about 3 1/2 inches cubed? If so, shoot me a PM and we can work out details. Ed |
|||||||||
ClintonMagus![]() Inner circle Southwestern Southeast 3997 Posts ![]() |
We have a local acrylic plastic supply company who can make pretty much anything out of acrylic. If you have one close by, check with them.
Things are more like they are today than they've ever been before...
|
|||||||||
tabman![]() Inner circle USA 5946 Posts ![]() |
Sounds like a plexy photo cube if you're looking for something open on one side. Should be able to get from maybe Walmart for a few bucks if they still make them or google one up.
-=tab
...Your professional woodworking and "tender" loving care in the products you make, make the wait worthwhile. Thanks for all you do...
http://Sefalaljia.com |
|||||||||
Ed_Millis![]() Inner circle Yuma, AZ 2292 Posts ![]() |
The two very picky points about this is that it's got to be the same size on all six sides, and it must have a lid that fits over the opening, not into the opening. Cutting straight sides in one challenge for me; glueing it all up straight is another. So I figured it's a wash!
Ed |
|||||||||
tabman![]() Inner circle USA 5946 Posts ![]() |
Understood. I used to get plexy stuff made in Nashville at Plastics Supply but like CM says any good plastics shop can make you what you need. Be specific with inside dimentions. They can polish the edges and make you a beautiful, professional box.
...Your professional woodworking and "tender" loving care in the products you make, make the wait worthwhile. Thanks for all you do...
http://Sefalaljia.com |
|||||||||
dsalley13![]() Elite user 465 Posts ![]() |
Look for a local T.A.P. Plastics franchise. They'll build it to your specifications. I have a few of their display cases/boxes and can attest to their ability to make a professionally looking product. As you've found out, it takes an inordinate amount of skill to work with sheet-acrylic.
dsalley13 |
|||||||||
Servaas Koomen![]() Regular user 138 Posts ![]() |
Have you tried melting it?
I can remember from highshool that we made clear cuts for a box by melting it with a device with a heated line it in
"The last three or four reps is what makes the muscle grow. This area of pain divides the champion from someone else who is not a champion. That's what most people lack, having the guts to go on and just say they'll go through the pain no matter what" A.
|
|||||||||
Bill Hegbli![]() Eternal Order Fort Wayne, Indiana 22797 Posts ![]() |
The stuff at the hardware store is not cut it is scored using a ruler and snapped off. If you put masking tape on it you can cut with a bench saw.
Seek out the use of plexi glass, it comes in different thicknesses and can be cut on a bench saw as well. It has a protective paper on it, it is not removed until after the cuts are made. I would go for at least 1/8" plexi from your favorite supplier, just let your finger do the walking in the telephone book. If you want you can use aluminum to attach the sides to. The angle pieces can hold the sides and you can pop rivet the plastic to the metal angles. |
|||||||||
Ed_Millis![]() Inner circle Yuma, AZ 2292 Posts ![]() |
Quote:
On 2009-09-15 17:51, wmhegbli wrote: Tried that. Guess I didn't score deep enough - the stuff cracked al the up and over! Quote:
All I have are Home Depot and Lowes. No plants or manufacturers in this little place. Quote:
If you want you can use aluminum to attach the sides to. The angle pieces can hold the sides and you can pop rivet the plastic to the metal angles. That was one of my original thoughts - it would even hide a badly cut joint. But I can't find aluminum or any other kind of angle thin enough to use for this. It's all meant for big home projects, not small crafts. Ed |
|||||||||
tabman![]() Inner circle USA 5946 Posts ![]() |
Why not just order one up from an internet plastics house.
I googled plexiglass box and came up with a bunch. Here's one: http://www.akrylix.com/preview.php?photo=130
...Your professional woodworking and "tender" loving care in the products you make, make the wait worthwhile. Thanks for all you do...
http://Sefalaljia.com |
|||||||||
raywitko Special user western Pa 527 Posts ![]() |
Lowe's carries aluminum angle 1/8" and 1/16" thick. You can get it from 1/2" angle on up. I picked up plexi at home depot. With a table saw, a miter saw for the angles, and a buffer for the edges of plexi I made this. http://www.tabmantables.com/plexibox
Also used a drill and poprivet gun. I used aluminum rivets. Ray
Sometimes it seems there are more than one of me.
Tabman USA magicdmv email me at [email]fursclass@magicdmv.com[/email] |
|||||||||
tabman![]() Inner circle USA 5946 Posts ![]() |
That's cool looking Ray. I like the "Spirit of St. Louis" rosettes you put on the extrusion. Nice!!!
...Your professional woodworking and "tender" loving care in the products you make, make the wait worthwhile. Thanks for all you do...
http://Sefalaljia.com |
|||||||||
Bill Hegbli![]() Eternal Order Fort Wayne, Indiana 22797 Posts ![]() |
Ed, I googled your town and find you are in driving range of San Diego and Phoenix, these cities can have what you are looking for, take a nice fun drive and have an adventure of travel.
If you are just not a DIY kind of person, then seek a plastic place in these cities to do it for you. It will not be that expensive. You have to have an ACE Hardware near you or the above cities. They have the aluminum I suggested as well. You are so near the Mexician Border that there may be something over there as well. Be adventureous and take a drive, visit a magic shop you have never been to before, it is fun. Then you can tell us about what you have discovered. |
|||||||||
BRodgers![]() Special user 543 Posts ![]() |
I also just googled acrylic boxes and got this:
http://www.tapplastics.com/shop/product.php?pid=222& All come with lids and are cheap.
Creator of The Phantom Band 360
|
|||||||||
raywitko Special user western Pa 527 Posts ![]() |
Quote:
On 2009-09-16 12:56, tabman wrote: Is that what it's called? Just easier doing that than trying to polish it. Ray
Sometimes it seems there are more than one of me.
Tabman USA magicdmv email me at [email]fursclass@magicdmv.com[/email] |
|||||||||
Ed_Millis![]() Inner circle Yuma, AZ 2292 Posts ![]() |
I called TAP Plastics and ordered one. Shipping was twice the cost of the box! But still cheaper than having it custom made. I had seen these before but it didn't look like what I needed. But a phone call verified some details and I took the plunge.
Thanks to all who responded. Ed |
|||||||||
tabman![]() Inner circle USA 5946 Posts ![]() |
Quote:
On 2009-09-16 14:57, Ed_Millis wrote: Smart! Fast and Easy.
...Your professional woodworking and "tender" loving care in the products you make, make the wait worthwhile. Thanks for all you do...
http://Sefalaljia.com |
|||||||||
Bill Hegbli![]() Eternal Order Fort Wayne, Indiana 22797 Posts ![]() |
Found this on ebay, they will cut the plexi free.
http://stores.shop.ebay.com/POP-DISPLAYS......Z4957577 |
|||||||||
Bill Hegbli![]() Eternal Order Fort Wayne, Indiana 22797 Posts ![]() |
Well, thanks for the question, it got me to order the solution from ebay to repair my sealed milk pitcher. I will now be able to use it for the milk on light bulb.
I also found their clear hidges and hasps for a plexi box I have had for some time but could not find them to get it finished. |
|||||||||
m.ruetz![]() Veteran user Peoria Arizona, USA 378 Posts ![]() |
I have always found that 1/8" plexi cuts quite well on a table saw (with a fine tooth blade). Set your blade for a 45 degree angle,set your fence for the size you want and cut each piece on each side. This way when you glue them together it's perfect fit. The 45 angles make it fit together perfectly.
MagicGizmo: Magic Articles, Classifieds, Videos, and more
http://magicgizmo.com |