|
|
illusionman2![]() Inner circle 1006 Posts ![]() |
Did I miss it in the plans? How did you put the pieces together (1 inch by 1 inch wood striping in the inside corners?)
|
ClintonMagus![]() Inner circle Southwestern Southeast 3997 Posts ![]() |
I ripped 1x1 square stock into 1x1 triangle stock and used that for the corner bracing.
Things are more like they are today than they've ever been before...
|
raywitko Special user western Pa 527 Posts ![]() |
Instead of using the thinner ply, I used 1/2" baltic birch and drywall screws. Didn't need any inside corner bracing for the boxes.
Ray
Sometimes it seems there are more than one of me.
Tabman USA magicdmv email me at [email]fursclass@magicdmv.com[/email] |