|
|
Go to page 1~2 [Next] | ||||||||||
curtgunz Special user Only 99% of users have more than 784 Posts |
Hi,
I did a search on http://searchthemagiccafe.com/ but could not find a discussion on this. I use these types of trunks to haul stuff to my birthday party shows: Link to trunk at WalMart.com I am thinking about attaching a flange to it so I can mount it on a tripod such as this: Link to tripod at Amazon.com Has anyone done this? What cautions, advice, or other things do I need to know before I do this? Thanks in advance to all.
Click for Free Resources for Performers
YouTube channel specifically for family & kids show magicians. Click -- You need to subscribe. |
|||||||||
Wizard of Oz Inner circle Most people wish I didn't have 5169 Posts |
I'm not an expert, but that looks like a whole-lotta box for a single mount stand. Depending on what you put in it, you can probably expect some wobbling, and teetering. If you just have low-weight items, i.e. scarves, sponge balls, etc., maybe you'll be okay.
Pay no attention to that man behind the curtain.
|
|||||||||
curtgunz Special user Only 99% of users have more than 784 Posts |
That's what I was thinking but those tripods hold pretty hefty speakers.
I've seen those type of speaker tripod stands in Guitar Center and the big speakers they are holding look about as wide as the trunk I'll be using and the speakers would weigh more. But, I have those same concerns about stability. That's why I wanted to ask here first 'cause even if no one has made my particular setup of trunk on a stand, someone may know more about how stable and sturdy the tripods are.
Click for Free Resources for Performers
YouTube channel specifically for family & kids show magicians. Click -- You need to subscribe. |
|||||||||
Wizard of Oz Inner circle Most people wish I didn't have 5169 Posts |
Good point regarding how heavy the speakers are. The only difference I can foresee (and again, I am NOT speaking from experience), is that you'll be "interacting" with the box, verses having it just stand there, like a speaker.
Still, hopefully someone with experience in this area will see this post and help. I hope it works out!
Pay no attention to that man behind the curtain.
|
|||||||||
slydini Loyal user 248 Posts |
I would use a camping table base.
|
|||||||||
Domino Magic Special user 999 Posts |
Those speaker stands really need to be open wide in order to provide stability - even without anything on them. It may take up more space than you're thinking. I have several of those stands and it's a fairly wide foot print.
Most likely what you're going to have to do to the trunk is add some plywood or other lumber inside to give it more strength and give the hardware for the flange something to hold on to. I'm sure that it is strong as it is, but you're going to be using it in a way it wasn't designed for. I can see that just attaching a flange directly to the trunk, without additional support, will cause it to crack or split. |
|||||||||
curtgunz Special user Only 99% of users have more than 784 Posts |
Those are all excellent points and why I come to TheMagicCafe.
I can definitively see that the plastic would split if hardware were attached. Also, I am guessing that the tripods I have seen displayed in stores must not have been spread all the way open because their footprint did not seem much bigger than a music stand kind of tripod. But Domino Magic's experience and advice saved me a lot of trouble and expense. I did not even think of Slydini's idea of a camping table base. I am not really sure what that is but it sounds very portable. Does anyone have a link to one they've used or would recommend. Again, thanks to everyone.
Click for Free Resources for Performers
YouTube channel specifically for family & kids show magicians. Click -- You need to subscribe. |
|||||||||
Alan Munro Inner circle Kentwood, Michigan, USA 5958 Posts |
Try a keyboard stand instead. http://www.sweetwater.com/store/detail/XStdDblLt/ It'll be quite stable. Besides, drilling holes in most plastics sets it up to crack.
|
|||||||||
SteveB Regular user St Louis, MO 117 Posts |
I would go with a Tray Jack. Those are the things you see in restaruants that waiters put trays on. They are light weight, fold flat and come in a couple of different heights. Just go to a restaurant supply store and they will have 10 kinds for less than 30 bucks.
I don't like the speaker stand idea for the reasons stated plus you are going to have that flange sticking out the bottom making the case hard to transport and impossible to play on a table if needed. love the case. |
|||||||||
Wizard of Oz Inner circle Most people wish I didn't have 5169 Posts |
Quote:
On 2011-07-18 15:18, Alan Munro wrote: We have a very similar stand for our keyboard, which is an older, larger model, and it is a very sturdy stand. Great idea Alan.
Pay no attention to that man behind the curtain.
|
|||||||||
jay leslie V.I.P. Southern California 9500 Posts |
How about trying the Krylon paint for plastic and paint a bunch of stars on the box - then you don't have to attach a cover cloth?
Jay Leslie
www.TheHouseOfEnchantment.com |
|||||||||
rsylvester Loyal user Trying to learn to BP a duck in 269 Posts |
Keyboard these days are much lighter weight than speakers. This one says it will carry 110 pounds, which is the size of a small assistant (and probably will handle your trunk). Show check out the load specs. I've been thinking about speaker stands for the same thing.
Keyboard stands make good tables I saw a street performer recently with a keyboard stand and a large picture frame, covered in black felt with an ornate gold frame. It was easy to carry and functional, because in the strong Kansas wind, the frame kept his magic from blowing away (literally). You can usually pick up decent size picture frames in bad paintings at yard sales for a few $$. It was very clever, I thought. |
|||||||||
jay leslie V.I.P. Southern California 9500 Posts |
Rsylvester
Side question, What's BP stand for - Bare Handed Production?
Jay Leslie
www.TheHouseOfEnchantment.com |
|||||||||
rsylvester Loyal user Trying to learn to BP a duck in 269 Posts |
Close. Back palm. An attempt to play on the abbreviations used on this forum. My aside: Admire your work, Jay.
|
|||||||||
Alan Munro Inner circle Kentwood, Michigan, USA 5958 Posts |
Quote:
On 2011-07-18 17:58, SteveB wrote: That's what I use, but since I didn't know the weight of the fully loaded trunk, I figured that a keyboard stand is a safer option. My wooden tray jack has been through a lot in the last 20 years and it still works well. For kid shows, I rest a plastic tote on it, as a prop case. The tote is the size of a large footlocker. |
|||||||||
curtgunz Special user Only 99% of users have more than 784 Posts |
Just a follow-up because I like it when others bring the conversation full circle.
I got a keyboard stand. Nice, light weight and adjustable height. It works great. Thank you everyone. You saved me expense, time, and frustration. Pfft...speaker stand. What was I thinking?!? By the way, I may use a tray jack for my other trunk full of puppets. As I always say; pack big, play small. Wait a minute... :0)
Click for Free Resources for Performers
YouTube channel specifically for family & kids show magicians. Click -- You need to subscribe. |
|||||||||
Bill Hegbli Eternal Order Fort Wayne, Indiana 22797 Posts |
Magic Inc. has a book that uses 2 footlockers and puts legs on them, then opens lids and puts rods on them with a crossbar. Now a curtain goes on the crossbar. So you now have a back stage area behind the curtain, with all your props in them. This idea uses footlockers in wood or metal, not the plastic ones you referenced.
I think it is in their book "Super Show". |
|||||||||
kennewhitson New user Kansas 69 Posts |
The speaker stands and trunk work well if you use two stands. No wobble issues that way and they still pack up small.
|
|||||||||
Alan Munro Inner circle Kentwood, Michigan, USA 5958 Posts |
Quote:
On 2011-07-21 15:48, kennewhitson wrote: I suppose that "small" is a relative term. The speaker stand that I use for my PA is about 3' long, when folded. I'd rather use a tray stand - it's only takes a second to setup. |
|||||||||
uncleperry New user 97 Posts |
Keyboard stand's a great choice. Strong, stable, easy height adjustment
You can fool some of the people all of the time, and that's usually good enough to make a decent living.
'unc. |