|
|
|
|||
Drew Manning Special user Dallas, Texas 913 Posts 
|
When building a sq cir, if I want to use flocking on the inside, what is the easiest order of steps?
The prop has to assembled, the exterior painted and the interior flocked. I want to do this the easiest way possible and obtain the cleanest results. If anyone has tips or adivce, I would appreciate it.
I live my life for a layer of ice
Just like those poured by my bartender vice Any taste of vermouth would be really sublime, When you have a good martini time! -The Reverend Horton Heat |
ClintonMagus Inner circle Southwestern Southeast 3997 Posts
|
Things are more like they are today than they've ever been before...
|
raywitko Special user western Pa 527 Posts
|
I would paint the out side first. Let it dry. Once dry, apply the adhesive on the inside and flocking. Let that dry and then vacuum the loose flocking.
Ray
Sometimes it seems there are more than one of me.
Tabman USA magicdmv email me at [email]fursclass@magicdmv.com[/email] |
Tony Thomas Inner circle North Carolina 1248 Posts
|
What Ray said is what I did. I didn't try to flock while each piece was seperate. You can do that with paint, but I don't think it would work as well with the flock. Your corners would have problems.
|
Posted: Feb 28, 2009 04:19 pm 